Bronte X20


strobe with one touch, 2*18650 800Lumens side-switch tactical flashlight


The latest Bronte X20 flashlight with Cree XM-L U2 LED and max 800Lumens.The new-type side button can realize strobe function whenever the flashlight is on . When it is lighting, it can realize three cycle dimming (medium-high-low). High performance metal reflector optical, powerful focused beam with long-range beam: 600M
smart dimming memory function, it can realize the last mode. Four levels for dimming: Medium-High-Low-Strobe can meet different lighting demands.
Bronte RA25s is best choice for fighting, hunting, exploring, caving, riding , driving.


Features
※ Cree XM-L U2 LED，Max 800 Lumens
※ The new-type side button can realize strobe function whenever the flashlight is on.
※ high performance metal smooth reflector ,powerful focused beam with long-range beam:600M
※ smart dimming memory function, it can realize the last mode
※ Tactical switch with momentary-on function
※ Max runtime 145Hours
※ The battery compartment designed by twin anti-seismic springs, stability and safety

Specification
LED：CREE XM-L U2 LED， Life span up to 50000 hours
Four levels for dimming
——Medium(400Lumens 5.5H)
——High(800Lumens 1.5H)
——Low(15Lumens 145H)
——strobe(9.5Hz 6H)
Battery:2*18650 / 4*16340 / 4*CR123A
Voltage:3V~16V
Material: manufactured with aerospace class aluminum alloy, military type Ⅲ hard anodized,
Lens：Toughened ultra-clear glass lens with anti-scratch coating
Waterproof to IPX-8 standard (2M underwater)
Dimensions: 233.6 mm (L) *61.2 mm (D)
Weight: 225G (excluding the battery)
Accessories: waterproof rings, tactical switch cap, holster,
Note: the above-mentioned parameters are approximate and may vary from flashlights, batteries, and circumstances


Operations
rear switch, push to open, push again to close
side switch:
A. side button can realize strobe function whenever the flashlight is on/off
B. when the light is on, gently push the button to change through three modes (Mid-High-Low)


Battery installation:
Insert the battery with the anode side (+) toward the light's head


Maintenance and cautions
1. Please clean the surface of the flashlight with dry soft cloth. Use soft cloth to clean fingerprints and dust of the lens
2. In order to achieve the best performance of waterproof, please regularly check the O-ring and apply lubricating grease in the O-ring to extend lifetime. Please replace the O-ring if they are damaged after using for a long time.
3. Avoid shining the light into the eyes directly
4. Please take out the battery if the flashlight will not be used for a long time and properly store