Bronte TU10-Ti


500Lumens TC4 titanium alloy bright flashlight shining on sale


Newly Bronte TU10-Ti flashlight with exquisite design, superior structures and powerful performance.The entire flashlight (including head, body, switch caps, locking plate) adopt titanium alloy and can emphasize the metal sense and special taste.
Bronte TU10-Ti flashlight with Cree XM-L U2 LED and max 500Lumens.Newly micro textured reflector design, combination of focus beam and flood beam.Smart instant memory function and realize four levels for dimming:Medium-high-low-strobe, can meet different lighting demands.
Bronte TU10-Ti is bright, perfect, fashionable, it is deserved to own.



Features
※ LED: Cree XM-L U2, Max 500 Lumens
※ Instant memory, It can realize the shift within 3-5 seconds, Or it will be automatically into the last mode next time.
※ newly micro textured reflector design, combination of focus beam and flood beam
※ Tactical switch with momentary-on function
※ Max runtime 110hours
※ The battery compartment designed by twin anti-seismic springs, stability and safety.

Specification
Cree XM-L U2 LED, Life span up to 50000 hours
Four levels for dimming
——Low (8Lumens 110H)
——Medium (195Lumens 4.5H)
——High (500Lumens 1.5H)
——strobe(9.5Hz 5H)
battery:1*18650 / 2*16340 / 2*CR123A
Voltage: 3V-9V
Material: TC4 titanium alloy
Lens: Toughened ultra-clear glass lens with anti-scratch coating
Waterproof to IPX-8 standard (2 M underwater)
Dimensions: 140 mm (L) *23 mm (D)
Weight: 136 g (excluding the battery)
Accessories: waterproof rings, lanyard

Note: the above-mentioned parameters are approximate and may vary from flashlights, batteries, and circumstances


light on/off and operation
rear switch: press to light, re-press to turn off
Dimming methods: when rapid constantly press and close the switch,it can realize cycle dimming :high-Medium-low-strobe
Notes: Instant memory, It can realize the shift within 3-5 seconds, or it will be automatically into the last mode next time.


Battery installation:
Insert the battery with the anode side (+) toward the light's head,


Maintenance and cautions:
1.Please clean the surface of the flashlight with dry soft cloth. Use soft cloth to clean fingerprints and dust of the lens
2.In order to achieve the best performance of waterproof, please regularly check the O-ring and apply lubricating grease in the O-ring to extend lifetime. Please replace the O-ring if they are damaged after using for a long time.
3.Avoid shining the light into the eyes directly
4.Please take out the battery if the flashlight will not be used for a long time and properly store